[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Serial IR receiver problem

Subject: Re: Serial IR receiver problem
From: Erk <mrman_man@xxxxxxx>
Date: 29 May 2007 14:10:56 -0700
Newsgroups: comp.home.automation
References: <1180175120.239232.39600@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <465a2233$0$644$5a6aecb4@xxxxxxxxxxxxxxxxx> <465a3d0c.300353312@xxxxxxxxxxxxx> <465b4b7a$0$644$5a6aecb4@xxxxxxxxxxxxxxxxx>

> That makes it much worse -- there's no FIFO on the modem signals.
> If the application monitors DCD by spinning, then it's not likely
> to work with anything else running on the system.
> What sort of bit rate is the IR signal?

The speed is normally set to 115200 in Winlirc, but I have tried
different settings with no luck.

Follow-Ups:
- Re: Serial IR receiver problem
  - From: Andrew Gabriel

References:
- Serial IR receiver problem
  - From: mrman_man
- Re: Serial IR receiver problem
  - From: Andrew Gabriel
- Re: Serial IR receiver problem
  - From: Dave Houston
- Re: Serial IR receiver problem
  - From: Andrew Gabriel

Prev by Message: Re: Serial IR receiver problem
Next by Message: Re: Roomba DirtDog
Previous by thread: Re: Serial IR receiver problem
Next by thread: Re: Serial IR receiver problem
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home