[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Lighting switch state communication

Subject: Re: Lighting switch state communication
From: "intergate news groups" <djraher@xxxxxxxxxxxxx>
Date: Wed, 14 Feb 2007 15:54:40 -0500
Newsgroups: comp.home.automation
References: <12spqfa9v1hin3b@xxxxxxxxxxxxxxxxxx> <uhu4t21i3suv69ku2l1ccu4is9sn3b9li3@xxxxxxx> <FbHAh.42810$2m6.40511@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> <knq6t2lol5i21r6qbr2jsll07t52tbdoa1@xxxxxxx>

    Mark,

The scenario I was looking at was turning on a light with the local switch,
and having the M1 receive the state change so a rule could be triggered. If
it's not to much trouble, could you try setting up a rule in the M1 to see
if this would work using the insteon hardware.  .

Thanks
Dennis

Follow-Ups:
- Re: Lighting switch state communication
  - From: Marc_F_Hult

References:
- Lighting switch state communication
  - From: intergate news groups
- Re: Lighting switch state communication
  - From: Marc_F_Hult
- Re: Lighting switch state communication
  - From: Jeff Volp
- Re: Lighting switch state communication
  - From: Marc_F_Hult

Prev by Message: What wire between Omnipro II and pads?
Next by Message: Re: Fluorescent lght
Previous by thread: Re: Lighting switch state communication
Next by thread: Re: Lighting switch state communication
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home