[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: XTB multiple inputs

Subject: Re: XTB multiple inputs
From: "Jeff Volp" <JeffVolp@xxxxxxx>
Date: Fri, 29 Sep 2006 20:50:49 GMT
Newsgroups: comp.home.automation
References: <1159559727.506991.306040@xxxxxxxxxxxxxxxxxxxxxxxxxxx>

"John, SW Missouri" <jmjones@xxxxxxxxx> wrote in message
news:1159559727.506991.306040@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Jeff,
>
> Is it possible (or recommended) to insert a 3-way adapter into the XTB
> so I can plug in a maxi-controller AND a TW523?

Yes, that should work fine.  I measured about 4Vpp on the "shared bus"
during transmit, and still over 200mV during receive.  And the combined
current is well below the maximum limit on the X10 receptacle.

Jeff

References:
- XTB multiple inputs
  - From: John, SW Missouri

Prev by Message: XTB multiple inputs
Next by Message: Re: Mac Mini for home control.
Previous by thread: XTB multiple inputs
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home