[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: XTB-II Options



The XTB-II prototype will be assembled next week, and the kit should be
available in a few weeks.  As described here before, the XTB-II will have an
internal terminal strip for connection to the AC line.  It needs connections
to both phases and neutral.  It should also have a ground connection to pass
through to the X10 receptacle on the cover.  The strain relief for the AC
input will accept up to .4" diameter powercord.

While it would work, I recommend against using a standard 250V 3-wire
receptacle, and just jumpering the ground and neutral together inside the
XTB-II.

The L14-20R and L14-20P are 125/250VAC 3-pole 4-wire locking connectors
appropriate for this application.  The XTB-II will be fused at 2 amps, so
#18 4-conductor SJ cord is sufficient for the interconnection. 4-conductor
SJ cord may be difficult to purchase locally, and I am considering buying a
spool to offer by the foot to anyone who wants to connect the XTB-II in the
recommended manner.  The stuff is expensive, and I will only provide it if
there is sufficient interest.

Is anyone interested?  Should I also offer the L14 connectors?

Jeff




comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home