[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: [Q] Can I use 230V/50Hz X10 Modules to 220V/60Hz country?

Subject: Re: [Q] Can I use 230V/50Hz X10 Modules to 220V/60Hz country?
From: HansO <msxhans@xxxxxxxxx>
Date: Fri, 20 Jan 2006 21:25:36 +0100
Newsgroups: comp.home.automation
References: <1137740645.087837.76490@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

"narusas" <narusas@xxxxxxxxx> wrote:

>I'm in South Korea.
>In my country, the power line is 220V/60Hz.
>
>So, I want to use X10 Europe modules (230V/50Hz).
>I know X10 voltage tolerance is +- 10%. so, the voltage is not problem.
>My question is the frequency.
>
>Is "50Hz  vs 60Hz" matter? Can I use X10 Europe(230V/50Hz)  module in
>my country?
>
>Please let me know. thanks.

The answer is yes, if you have a single-phase house installation. Same reason
why 60 Hz equipment from the USA works fine in 50 Hz European installation
(after modifying for diffence in voltage ofcourse)
Hans, http://www.hansotten.com

References:
- [Q] Can I use 230V/50Hz X10 Modules to 220V/60Hz country?
  - From: narusas

Prev by Message: Re: Basic setup for zoned listening
Next by Message: Re: Connecting 16th century antenna wire to 21st century coax
Previous by thread: [Q] Can I use 230V/50Hz X10 Modules to 220V/60Hz country?
Next by thread: Trash-Bot
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home