[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Wall switch with 0%-10%-100% only?

Subject: Re: Wall switch with 0%-10%-100% only?
From: Don Wiss <donwiss@xxxxxxxxxxx>
Date: Tue, 03 Jan 2006 19:18:27 -0500
Newsgroups: alt.home.repair, comp.home.automation
References: <potjr1li6d8aj06tf72tgr5m88fe1etrdr@xxxxxxx> <dLtuf.1027$DY3.361@xxxxxxxx> <1136314376.114227.63010@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

On 3 Jan 2006 10:52:56 -0800, "Mark Thomas" <mrt@xxxxxxxxxxxxxx> wrote:

>Manny Bhuta wrote:
>>  Pressing the top of the
>> switch once lights the bulb at dim level, pressing the top again makes it full
>> bright and pressing the bottom turns it off.  You may be able to use the new
>> Icon switch.
>
>Maybe... the double-tap for full ON feature is not mentioned in the
>ICON manual though. Also there's a limit of 300 watts with that switch.

Remember this is a bathroom. 300 watts is more than enough.

Don <www.donwiss.com> (e-mail link at home page bottom).

References:
- Wall switch with 0%-10%-100% only?
  - From: Don Wiss
- Re: Wall switch with 0%-10%-100% only?
  - From: Manny Bhuta
- Re: Wall switch with 0%-10%-100% only?
  - From: Mark Thomas

Prev by Message: Re: Looking for Temp and humidity sensors
Next by Message: Re: Leviton Intellisense Vs Others
Previous by thread: Re: Wall switch with 0%-10%-100% only?
Next by thread: Re: Wall switch with 0%-10%-100% only?
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home