[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: X-10 RF Freq Mod

Subject: Re: X-10 RF Freq Mod
From: nobody@xxxxxxxxxxxx (Dave Houston)
Date: Sat, 23 Dec 2006 12:54:00 GMT
Newsgroups: comp.home.automation
References: <omrgo25neap2803rmp6v3q4jt9m48f2jug@xxxxxxx> <45888396.382829218@xxxxxxxxxxxxx> <93vmo2hamhlkokgemgbd9ia8loeqpdjf89@xxxxxxx> <458bbc55.593960468@xxxxxxxxxxxxx> <rdqoo2hl2kietrhbuno3dqsgul6d4u7juu@xxxxxxx> <458ca945.654614859@xxxxxxxxxxxxx> <8bdpo29vqher1t0817pl3h3n6tq73od63o@xxxxxxx>

Just Another Joe <address@xxxxxxx> wrote:

>Well, once the RF is going direct to Ocelot instead of via PLC, that
>will eliminate PLC collisions of these signals, leaving only RF.  But,
>it stands to reason that if many sensors are in use, and/or are located
>in high activity areas, that /some/ (many|few) palmpad RF transmissions
>will collide with sensor transmissions.

It would be best to move this discussion to the roZetta group on Yahoo. (see
sig)

http://davehouston.net
http://tech.groups.yahoo.com/group/roZetta/
roZetta-subscribe@xxxxxxxxxxxxxxx

References:
- X-10 RF Freq Mod
  - From: Just Another Joe
- Re: X-10 RF Freq Mod
  - From: Dave Houston
- Re: X-10 RF Freq Mod
  - From: Just Another Joe
- Re: X-10 RF Freq Mod
  - From: Dave Houston
- Re: X-10 RF Freq Mod
  - From: Just Another Joe
- Re: X-10 RF Freq Mod
  - From: Dave Houston
- Re: X-10 RF Freq Mod
  - From: Just Another Joe

Prev by Message: Re: X-10 RF Freq Mod
Next by Message: Re: Control Ceiling Lights
Previous by thread: Re: X-10 RF Freq Mod
Next by thread: Re: X-10 RF Freq Mod
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home