[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: X10 signals can be TOO strong!

Subject: Re: X10 signals can be TOO strong!
From: "Jeff Volp" <JeffVolp@xxxxxxx>
Date: Thu, 14 Dec 2006 22:56:43 GMT
Newsgroups: comp.home.automation
References: <xFhfh.471684$QZ1.157389@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> <qtdgh.203122$Fi1.110592@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> <1335298@xxxxxxxxxxxxxxxxxxx> <u7i3o25pmcg42v8cp0co0dn8d75euuk7of@xxxxxxx>

"Marc_F_Hult" <MFHult@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:u7i3o25pmcg42v8cp0co0dn8d75euuk7of@xxxxxxxxxx
>
> Another possibility is saturation of the inductor core at high currents.

I considered that, but there should be virtually no current to saturate the
core before the triac switches on.  And even after the triac switches on,
the inductor would take some time to saturate.

Jeff

Follow-Ups:
- Re: X10 signals can be TOO strong!
  - From: Marc_F_Hult

References:
- X10 signals can be TOO strong!
  - From: Jeff Volp
- Re: X10 signals can be TOO strong!
  - From: Jeff Volp
- Re: X10 signals can be TOO strong!
  - From: Dan Lanciani
- Re: X10 signals can be TOO strong!
  - From: Marc_F_Hult

Prev by Message: Re: Z-Wave RF range
Next by Message: Re: X10 signals can be TOO strong!
Previous by thread: Re: X10 signals can be TOO strong!
Next by thread: Re: X10 signals can be TOO strong!
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home