[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Writting your own X10 software

Subject: Re: Writting your own X10 software
From: nobody@xxxxxxxxxxxx (Dave Houston)
Date: Mon, 07 Aug 2006 13:32:57 GMT
Newsgroups: comp.home.automation
References: <1154944625.007328.194730@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <0oaed2pklt53g4442p8j3183tlq8ke7o34@xxxxxxx> <1154957268.408976.161220@xxxxxxxxxxxxxxxxxxxxxxxxxxx>

Aside from the mains voltage, all of the CM11* devices are identical in
function. Software written for the CM11A will work with all variants.

jpw15@xxxxxxxx wrote:

>i have looked at these but they only say the software works with the
>cm11a, are both devices comatible with the same software i havnt tryed
>it yet but i will.

Follow-Ups:
- Re: Writting your own X10 software
  - From: jpw15
- Re: Writting your own X10 software
  - From: jpw15

References:
- Writting your own X10 software
  - From: jpw15
- Re: Writting your own X10 software
  - From: Marc_F_Hult
- Re: Writting your own X10 software
  - From: jpw15

Prev by Message: Re: AHU control for church
Next by Message: Re: X10 Passive Couplers
Previous by thread: Re: Writting your own X10 software
Next by thread: Re: Writting your own X10 software
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home