Re: Computer Aided Gate Opener

["Benedictum" <dominus@xxxxxxxxx>]

see http://www.smarthome.com/2010.html
you will need the universal module, a computer interface, e.g. CM11a see
http://www.smarthome.com/1140.HTML

you will have to write your own program to control the CM11a.

The universal module will have to be wired into your gate's push button
switch. make sure that this switch is a toggle switch, meaning when the gate
is open, it will close it and when it is closed, it will open it. If you
need to see the status of your gate remotely you may have to install the
powerflash module. With a magnetic sensor it can send a signal to any X10
device.

The wiring is easy, writing the program is another thing.

"G. Morgan" <alarmpro@xxxxxxxxxxx> wrote in message
news:3j1ne2p8b713rcc7nq5u1ptq7uc50qquqq@xxxxxxxxxx
> On 22 Aug 2006 10:16:51 -0700, "Paul" <surfxxxbud@xxxxxxxxx> wrote:
>
>>Does anyone know of a system that will allow me to open and close my
>>sliding gate by striking an "F" key?
>
> ffffffffffffffffffff
>
>
> did it open?
>
>