[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Laptop AC adapter kills X10 signal

Subject: Re: Laptop AC adapter kills X10 signal
From: nobody@xxxxxxxxxxxx (Dave Houston)
Date: Mon, 14 Nov 2005 14:09:50 GMT
Newsgroups: comp.home.automation
References: <op.sz8e3nq8mqxr1t@thinkpad>

A plug-in X-10 filter will usually cure this problem whether it is caused by
noise from the power supply or by line filters in the power supply that
attenuate the X-10 signal. Occasionally noise will require two filters in
series.

"Alain Caillet" <AA-Caillet@xxxxxxxxxx> wrote:

>
>My IBM laptop AC adapter kills the X10 signal in the room it's connected.
>
>As soon as I unplug it, the X10 remote+transceiver link can send its
>command to all my modules.
>
>Can I had a filter in series with the power pack (it's a switch power
>supply 100-240 V AC to 16v DC)
>
>Thanks in advance
>
>Alain

References:
- Laptop AC adapter kills X10 signal
  - From: Alain Caillet

Prev by Message: Re: Short Plenum Run Question
Next by Message: Re: mystery signal
Previous by thread: Laptop AC adapter kills X10 signal
Next by thread: Keypadlinc interferes with homeplug network!
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home