[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: RC-80B Thermostat Issue! Fixed...



Sorry folks... I found the problem. It was a broken lead inside the Omni
cabinet affecting the received signals from the stat...

"It always pays to check things twice!"

Regards

Tony


"Tony Huk" <tony@xxxxxxxxx> wrote in message
news:EpOdncOCpKnUgRbeRVn-vg@xxxxxxxxxxxxxxx
> All,
>
> I have 2 RC-80B Stats connected to an HAI Omni-Pro II controller. Both
> thermostats have worked correctly since installation in June '05. However,
> one of my thermostats no longer reports current room temperature to the
> controller... it reports "0" as the temperature. All other functions on
> this thermostat seem to work, including remote operation.
>
> Lastly, the thermostat's local display shows the correct room temp.
>
> Any advice or suggestions would be greatly appreciated!!!
>
> Regards,
>
> Tony
>




comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home