Re: X10 noise issue

[jim.mccroskey_at_dexmedia_dot_com@xxxxxxx (jmccros)]

I am having the same problem. Modules do not work much between 10am and
7pm.
I have not even been able to turn off a socket that is 1/2 controlled and
the other 1/2 live power when I plug my controller into the live side.
I feel there must be some outside interferance.
Did you ever resolve this issue?

-------------------------------------
Art Todesco wrote:




> Hi All,
> I thought I had solved a sudden change in X10 behavior, however, it
> seems to be getting worse.  I thought I traced it down to a battery
> charger which definitely had an effect, but that doesn't seem to be the

> case anymore.  The problem is that some "talker" can't get to
> "listener"
> but can get to others.  One channel (a wall switch module) just seems
> to
> turn on randomly.  It is then very difficult to turn it off via X10.
> You have to actually use the wall switch.  BTW, earlier in the day I
> could turn it on from one of the 16 button manual controller, however,
> some times it would take 2 or 3 tries before it would succeed.  It
> seems
> to change from hour to hour ... seems worse in the evening, best in the

> morning and mid afternoon.  Can noise be coming in from outside the
> house?  Does anyone have an experience with the so-called whole house
> noise blocker/couplers like Smarthome PZZ01?  This is starting to drive

> us nuts!  Any help would be greatly appreciated.






##-----------------------------------------------##
Article posted with Cabling-Design.com Newsgroup Archive
http://www.cabling-design.com/forums
no-spam read and post WWW interface to your favorite newsgroup -
comp.home.automation - 5224 messages and counting!
##-----------------------------------------------##