Re: Bwahahahahahahahahahaha

[RTS <gafa@xxxxxxxxxxxxx>]

On 1/2/2023 1:08 PM, Bob La Londe wrote:
> On 1/1/2023 10:06 PM, RTS wrote:
>> On 1/1/2023 12:54 PM, Bob La Londe wrote:
>>> Today's "SPAM"
>>>
>>> Honeywell Commercial Security, "It's Time to Grow THE SECURITY
>>> CONSULTANT's Business and Bottom Line"
>>>
>>> Just a little late to the table doncha think.  Heck tomorrow I might
>>> get an apology from Rob Blaire at Optex.  LOL
>>>
>> Honeywell,  lost all my respect  many, many, many, moon's ago..
>> You ever get nostalgic for the ole days of ADEMCOÂ  and the 1000
>> panels..?.
>> Â Â RTS
>
> I never really did Ademco panels.  Just a few takeovers and the horrible
> hydrid abomination. The FBII HC41.
>
> I went from DSC to FBII (I used FBII until, well Ademco) to Napco. The
> Napco MA panels sucked pretty hard, and almost ruined Napco for me.
> Couldn't use zero?  REALLY?  The Gemini panels were my main stay for
> most of my time in the business.  I tried to go back to DSC once, but
> found them confusing and disorganized compared to PC programming (or
> even keypad programming) a Napco Gemini.  I used a lot of other stuff
> over the years as well, but I put in a LOT of Napco Gemini panels.
>
> I like Caddx NX8E panels too.  I hated the Caddx Ranger.
>
first guy I worked for, we did 95% ademco, all models, after the 4080
failures  he switched to Adcor/Acron.  then later over to Moose...
When I went out on my own, I continued with the Moose line..
Then switched over to Electronics Line (from Israel)
Electronics line even had me do a tech paper on their poorly designed
telephone fusing system..
(go figure, they were using 60vdc on board one shot fuses)
Did fine till the phone rang..   HAHA  couldn't handle 90vac..
Did some Firelite, Silent Knight, fire panels
We did some Caddix, Rokonet, Napco, Radionics, DMC, burg. panels
Nearing retire, I worked some with my first guy's son, he was sold
on 100% FBI..
Even had some homebuilt stuff in the early 80's..
Best I ever used was the Moose,  Z700 & Z900,  and the iron maiden
their  MPI-25 & 50..  Talk about taking a licking and still ticking.
I had a MPI-50  hit by lighting 3 times, and kept working..
Destroyed everything else in the building except the panel..
The absolute worst panel I ever touched was the Ademco 4080..
Ever was a dog  that one was it..
We installed 48 one summer and by Christmas we had replaced 46..
But every installer has stories to tell, if he's be in the business
any length of time...
RTS
--

*Rocky T. Squirrel, esq.*