Re: Hack Job Solutions

[ABLE1 <somewhere@xxxxxxxxxxx>]

On 6/25/2022 8:50 PM, Bob La Londe wrote:
> The electric strike (day lock) on the back door of my shop wasn't
> working.  I could hear it click, but it wasn't releasing.  Not an
> uncommon occurrence in the dusty southwest.  In the past I have taken
> them apart, cleaned them and carefully lubed them with a good dry lube.
>
> I just didn't feel like it.  I blasted the strike out with Hoppes Gun
> Medic.  The strike is working great.  Now to see how long until the lube
> in the Hoppes gums it up with dust and I have to clean it again.
>
> I actually prefer Ballistol for the labeled purpose, but the local
> stores only seem to stock the Hoppes in larger cans.
>
> To be fair to the strike I don't think I have EVER cleaned it since
> installing it around the end of 2014.  Sorry.  Can't tell you the brand.
>  Â I forgot, and if I wasn't going to take it apart for a necessary
> cleaning I'm sure not going to open it up just to read the name.
>
> For their intended purpose neither clean/lube product gums things up,
> but I don't leave those items on the outside of a building all day every
> day either.
>
>

Hi Bob,

I very rarely do any service work on electric strikes.  When I do it is
in the dry mode.  I clean up or blow out and dust and dirt and never
put any oil or lube on the unit.  I always use the theory that when
oiled or lubed over time dust and dirt will collect and eventually jam
up the mechanism thus make it not work as it should.

If not then the unit has just worn out and can't work as designed or the
electric coil has smoked.

Now maybe things are different in your "dry" environment.

And yes, before I do the above I check voltage, coil, wiring connections
etc. Don't want to do dumb work if not needed. I do enough of that with
other STUFF!!!  ;-)

Have a good day.

Les