[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Vista 20P 5800 series wireless InSaNiTy!



On Wednesday, February 24, 2021 at 9:33:52 PM UTC-6, Airdorn wrote:
> On Fri Jan 15 06:34:25 2021 Airdorn wrote:
> > Hello friends!
> >
>
> [SNIP]
>
> Just a quick follow-up about this 5800 series wireless crazyness...
>
> I'm going out to this location tomorrow to just replace the Vista 20P system with a DSC 1832, 5500Z keypad, and some DSC wireless devices.
>
> I tried everything mentioned in this post to no avail. Sensing the customer was beginning to get fed up, I decided to just start over with another manufacturer.
>
> I thought about using one of those Aluha translator devices and keep the Vista 20P and keypad, but it turns out that they won't translate life-safety devices like smoke detectors.
>
> I shot the customer a very fair price (right at cost actually, just to keep their business) and they were fine with that.
>
> I'll let everyone know if the DSC equipment has the same problems!
>
>
> Airdorn

Depending on which DSC equipment, if you are using the older legacy sensors they operate at 433 mhz, the new PowerG stuff is 915 mhz and has far longer range and I doubt you will have interference problems




alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home