[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: Napco GEM-P9600 Strange Behavior After Power Outage
On 2/18/2021 8:31 PM, Grant P wrote:
> Lost power for extended period of time. Battery went dead. I have an Expansion Zone Module (EZM) and three partitions configured on the 9600.
>
> After power was restored, the following things are occurring:
> 1-The EZM red LED is solid and the module is beeping every 34 seconds.
> 2-The keypad for the primary partition says **Zones Faulted** and it then proceeds to display each of the following numbers, one at a time, of: 01-, 02-, 03-,....08-. It then repeats this continuously.
> 3-The keypads for the other two partitions are continuously displaying '02-Out of System' and '03-Out of System' respectively.
>
> Any ideas what has happened and how to fix it?
>
Just a quick guess....................
Install a NEW Battery and restart the system would be #1.
Les
alt.security.alarms Main Index |
alt.security.alarms Thread Index |
alt.security.alarms Home |
Archives Home