[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: Radionics D7412G Ground fault detection
- Subject: Re: Radionics D7412G Ground fault detection
- From: "doug" <vssdoug@xxxxxxxxx>
- Date: Wed, 29 May 2019 15:51:17 -0700
- Newsgroups: alt.security.alarms
- References: <qcn2ao$2u7$1@dont-email.me>
"doug" <vssdoug@xxxxxxxxx> wrote in message
news:qcn2ao$2u7$1@xxxxxxxxxxxxx...
>
> I have a customer with a D7412G, doesn't appear to detect ground faults
> Ground fault detection is enabled by the little wire switch under terminal
> 10
> The ground is good, but I can leave a jumper on all day from ground to any
> of the terminals that are supposed to detect a GF with no fault detected.
> I tried a different panel with the same results, as far as I can tell
> there are no program options for ground fault detection, just the wire
> switch
> The first panel was version 6.10, the second 6.40 according to the manual
> any version 6.10 or higher should work.
> Anyone have ideas what could be wrong, is there some option I am missing?
> I can't imagine that both panels are bad, they both appear to work in
> every other respect
>
> What am I missing, it should be simple but for some reason I'm struggling.
>
> Doug
alt.security.alarms Main Index |
alt.security.alarms Thread Index |
alt.security.alarms Home |
Archives Home