Re: Dead system

[Richard <richard@xxxxxxxxxxxxxxxxxxxx>]

On 4/1/2017 5:27 PM, mleuck wrote:
> On Wednesday, March 22, 2017 at 11:05:30 PM UTC-5, doug wrote:
>> <ddhaff@xxxxxxxxx> wrote in message
>> news:08bca54e-36f9-43dc-8800-ed820b1ba464@xxxxxxxxxxxxxxxxxxx
>> I have a PC 1550 with a PC1500RK keypad. I had to do some work in the garage
>> with the sheet rock, and had to disconnect the keypad wiring. When I
>> finished, I routed the wire back thru the wall and connected it up to the
>> keypad. Now the system is dead. A local installer gave me the procedure for
>> resetting the system, which I did, but the system is still dead. Do I need
>> to buy a new keypad?
>>
>> I think the 1550 had replaceable fuses in the top left hand corner of the
>> circuit board, if so its possible that a fuse is blown
>
> And good luck finding replacements
>


do DCS panels do like some Honeywell panels,  where you have to plug the
transformer in first then the battery or else  the system will not start?


--
from the desk of:
*Richard Phillips, FAR-601
T.P.E.Security
Kentucky Security
Providence - Madisonville - Nortonville
* (age before beauty, that means I go first)