Re: B connectors

[JoeRaisin <joeraisin2001@xxxxxxxxx>]

On 2/1/2015 1:52 PM, Rocky wrote:
> we use the gel filled  and purchasing gets Them from ADI  not sure of
> the price..
> also  you might try some of the gel filled  wire nuts  for those larger
> bundles
>
> trick with beenies  "never fully mash them down  (they'll cut your wires)
>
> RTS
>

Thanks.

Another trick I've found is to ensure that there is at least a little
insulation under the teeth or they can slip off, revealing bare copper
inviting a short.

I usually strip and twist about half an inch and then fully seat the
wire in the beenie.

ADI was my first thought, but we've been having problems with deliveries
taking forever.

Google pulled up quite a few low voltage stuff suppliers - I'll give one
of them a whirl.