[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Caddx NX8E



"ABLE1" <someone@xxxxxxxxxxx> wrote in message
news:bAxyx.26284$Q_3.14766@xxxxxxxxxxx
> On 8/11/2015 1:12 PM, Bob La Londe wrote:
>> This is old stuff from before the buyout, but the customer wants smart
>> phone remote access for status and arm/disarm.  I am not even sure where
>> to start. My first thought is to swap to a Napco panel and use iBridge,
>> but that's an awfully expensive solution in initial hardware and labor
>> outlay and the Caddx NX8e is actually the better panel for the multiple
>> building application with its self contained expansion modules.
>>
>> Any suggestions?
>>
>> I know I can throw a switch out / status input cellular unit on it, but
>> that is awfully inelegant for such limited functionality.
>>
>
> Bob,
>
> Stick with the NX8E.  I have quite a few installed as well as the NX8V2.
> Love the panel.  It lets me do things that I doubt would be possible with
> others.  Well maybe the Elk M1 but that is another story.
>
> Not sure your thoughts on Alarm.com but what you are thinking of doing is
> very easy with that service and the interactive option.
>
> The NX592E module will marry up with the NX8E and works seamlessly.
> The only trick is the version of the NX8E needs to be up to date.
> Meaning there issues with older versions.
>
> The latest Control Version is 19.00
>
> I would say that anything less than Control Version 17.00 would be an
> problem.  I had a big issue with a couple of Version 8.00 and picked up a
> new "board only's", swapped in and program.  All worked just fine.
>
> Let me know if you need more input.
>
> Les

So an eprom swap to update is out of the question?







alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home