[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Caddx NX8E




> Ed,
>
> Interesting.  The last time I looked at IPDatatel the Networx equipment
> was not included.  Now it is.
>
> However, according to the docs the NX8E is not on the list of supported
> panels.  The NX8-6-4-V2 panels are supported.  See page 24 here:
> https://ipdatatel.com/downloads/M-IPD-BAT-CDMA-072315.2.2.pdf
>
> As a side note, GE/UTC Tech Support will not recognize this equipment.
> And will like not provide any help since they just say it is not
> supported.
>
> Thanks for the input.
>
> Les
>

Hi Les,

Actually, all version 2 of the panels can be used, NX 4-6-8. An 8E version
is a version 1 just like a plain 8. Also, I have never had any problem
getting help from GE tech support, although you do have to know how to ask.

There are specific ways to program the NXv2 panels when using the IPdatatel
equipment. I got all the info over time by speaking to different techs at
IPdatatel. If you let me know exactly what you will be doing with it, I can
tell you exactly how to program the panel to achieve the results that you
need. The device on a Networx panel reads everything from the event buffer
and it is transmitted to the cs and the customer, depending on what you may
have enabled for the customer to receive.

I do not use the tip & ring to transmit. I call up Ipdatatel and tell them
to enable GSM emulation on all systems. That is how we get triple redundancy
when there is an available telco line. Some of their techs will resist at
first, I tell them that I know what I am doing and to just do it. The senior
guys know better.

It is worth investigating. You will find that as you become more familiar,
your expertise will grow with what you can do with their equipment.





alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home