Re: Ademco Honeywell Compass modem AT commands for Hayes Smartmodem OPTIMA 9600 to Vista panel?

["Bob La Londe" <none@xxxxxxxxxx>]

<luke.skaff@xxxxxxxxx> wrote in message
news:e48657bf-2262-4e5e-a669-1375853653d1@xxxxxxxxxxxxxxxxxxx
> I am pulling my hair out trying to get a Hayes Smartmodem OPTIMA 9600 to
> connect to a Honeywell Vista-21iP panel with the modem direct wired to the
> panel using the required telephone cable with a 150 Ohm resistor.  I am
> getting a "Panel is not answering the call, or issue with telephone
> cable", I hear the modem try to talk to the panel through the modem
> speaker.
>
> Part of the problem is the modem is on the Honeywell supported modem list
> but not on the modem list in the compass software
> http://library.ademconet.com/MWT/fs2/CMP1580ADCD/Modems-that-are-compatible.PDF
> So are is there a custom AT sequence needed for this modem.  I have tried
> all the Hayes modems and they do not work.
>
> I have set the "allmodem=1" setting in the download.ini file as specified
> in the compatible modem document above but not really sure what that does.
>
> Questions
> - Does anyone know the AT commands to get this modem to work
> - Why are there four boxes for custom AT commands and each modem has the
> AT commands in different boxes?
> - Does anyone know what the jumper JP1 under the front cover of the modem
> does?

Just buy a line simulator and be done with it.