[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Ademco Honeywell Compass modem AT commands for Hayes Smartmodem OPTIMA 9600 to Vista panel?



I am pulling my hair out trying to get a Hayes Smartmodem OPTIMA 9600 to co=
nnect to a Honeywell Vista-21iP panel with the modem direct wired to the pa=
nel using the required telephone cable with a 150 Ohm resistor.  I am getti=
ng a "Panel is not answering the call, or issue with telephone cable", I he=
ar the modem try to talk to the panel through the modem speaker.

Part of the problem is the modem is on the Honeywell supported modem list b=
ut not on the modem list in the compass software
http://library.ademconet.com/MWT/fs2/CMP1580ADCD/Modems-that-are-compatible=
.PDF
So are is there a custom AT sequence needed for this modem.  I have tried a=
ll the Hayes modems and they do not work.

I have set the "allmodem=3D1" setting in the download.ini file as specified=
 in the compatible modem document above but not really sure what that does.

Questions
- Does anyone know the AT commands to get this modem to work
- Why are there four boxes for custom AT commands and each modem has the AT=
 commands in different boxes?
- Does anyone know what the jumper JP1 under the front cover of the modem d=
oes?


alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home