[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: Vista 20 not dialing out
On Saturday, June 15, 2013 6:12:01 PM UTC-4, John Sowden wrote:
> I am reprogramming an Ademco Vista 20 (not a P or SE). I have not
>
> defaulted the control.
>
> I have programmed in the phone number, format (7-contact id), account
>
> code (0123), placed 10 in the first pair of boxes in the *56 zone
>
> programming section for each zone.
>
>
>
> Problem: when the system is tripped (Keypad * + #), hard wire zone panic
>
> (type 06) or a burg zone, the system does not send a signal. With a
>
> telco handset placed on the brown/gray telco pair I get dial tone
>
> immediate after tripping the panics (no delay). This means no line
>
> seizure. Telco handset on red/green gives me dial tone (no attempt to
>
> dial). Of course no signal or call at the CS.
>
>
>
> Help?
I looked at various versions using compass and they did not move move features where added with each version only other thing I can think of is you inadvertently deleted primary phone number try reprogramming it.
alt.security.alarms Main Index |
alt.security.alarms Thread Index |
alt.security.alarms Home |
Archives Home