Re: NX8v2 service fault and arm

["Techvoid" <not@xxxxxxxxxxxx>]

"proguard" <sp.kintzonides@xxxxxxxxxxx> wrote in message
news:3cb1242d-ad52-4df3-9cab-f3d0eabed49a@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
On 25 Ìáñ, 14:34, "Techvoid" <n...@xxxxxxxxxxxx> wrote:
> "proguard" <sp.kintzoni...@xxxxxxxxxxx> wrote in message
>
> news:b11657cc-9d87-4ae0-b1c1-387817b11c49@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
> > Does anyone knows where to locate in DL900 and disable the service
> > fault acknowledgement because in one of my installations when there is
> > a service fault i.e. fail to communicate my client cannot arm the
> > system...
> > thanks in advance
> > spyros
>
> they may have to punch the code in twice to arm or disarm until the fault
> is
> cleared. first time panel tells you something is wrong, second time to arm
> or disarm.

Nick, this is on OMNI seriesof Honeywell as you mention.
We'll try twice the code, but that we did is to aknowledge the problem
with *2 and then the code to arm and nothing happens.

*44 will send a manual test to central [if set ON in progamming loc37,
segment 2, option 7]
that would end ftc trbl by forcing successful comm.