Re: VISTA 12D

[proguard <sp.kintzonides@xxxxxxxxxxx>]

On 9 =CE=9C=CE=AC=CF=8A=CE=BF=CF=82, 22:36, JoeRaisin <joeraisin2...@yahoo.=
com> wrote:
> On 5/9/2011 1:39 AM, proguard wrote:
>
>
>
>
>
> > On 8 =C3=8C=C3=9C=C3=BA=C3=AF=C3=B2, 14:57, nick markowitz<nmarkow...@g=
mail.com> =C2=A0wrote:
> >> On May 8, 7:25 am, proguard<sp.kintzoni...@xxxxxxxxxxx> =C2=A0wrote:
>
> >>> Recently i did *97 1 at an Ademco Vista 12D panel in order to reset
> >>> default values but after that the keypad is "dead"! It dispalys
> >>> nothing! Any idea?
>
> >>> Thanks!
>
> >> never heard of a 12 D but if default command went thru it probably
> >> does not recognize the address for the key pad.
>
> >> most newer series panels need first initial keypad set at address =C2=
=A016
> >> or 00 =C2=A0 if not the display will be blank.
>
> >> check address by pushing and releasing 1 and 3 together =C2=A0if =C2=
=A0 not 16
> >> or 00 =C2=A0then power down keypad =C2=A0power up hit 1 and 3 together=
 release
> >> press in correct address then star and it should display default data
> >> properly.
>
> > Thanks dear Nick. I put keypad at address 16 and it works again. At
> > address 00 it displays nothing. So it works only at add 16.
> > After *97 the keypad went at address 17 thats why.
> > Thanks a lot.
>
> That makes sense. =C2=A0The other company I worked for had a standard thi=
ng
> where we would program the system keypads to 17 and up, reserving 16 for
> a programmer keypad temporarily connected at the panel. (We used the FA
> 168CPS - sounds like you have a Vista 20P or something similar)
>
> That made it easier for service guys later and allowed the installer to
> work right from the head end.- =CE=91=CF=80=CF=8C=CE=BA=CF=81=CF=85=CF=88=
=CE=B7 =CE=BA=CE=B5=CE=B9=CE=BC=CE=AD=CE=BD=CE=BF=CF=85 =CF=83=CE=B5 =CF=80=
=CE=B1=CF=81=CE=AC=CE=B8=CE=B5=CF=83=CE=B7 -
>
> - =CE=95=CE=BC=CF=86=CE=AC=CE=BD=CE=B9=CF=83=CE=B7 =CE=BA=CE=B5=CE=B9=CE=
=BC=CE=AD=CE=BD=CE=BF=CF=85 =CF=83=CE=B5 =CF=80=CE=B1=CF=81=CE=AC=CE=B8=CE=
=B5=CF=83=CE=B7 -

I am trying to add 3 keypads, one 6164 icon at add 16, and 2 others
6148 icon at add 17 and 18. They work only addresses 16 and 17.
i cannot find another address to work...