[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Replace 6160RF with 5883H error code 100

Subject: Re: Replace 6160RF with 5883H error code 100
From: mleuck <m.leuck@xxxxxxxxx>
Date: Thu, 6 Jan 2011 18:10:09 -0800 (PST)
Newsgroups: alt.security.alarms
References: <lKOdnenxLq-v9rvQnZ2dnUVZ5jednZ2d@xxxxxxxxxxxx>

On Jan 6, 7:23=A0pm, "Christopher Glaeser" <c...@xxxxxxxxxxxxx> wrote:
> I am replacing the 6160RF transceiver functionality with a 5883H. =A0I
> disabled the 6160RF receiver and transmitter, and added the 5883H. =A0An =
error
> code "CHECK 100 RF RECEIVER" is generated. =A0I tried setting the 5883H d=
ip
> switches to a different set of transmit and recieve addresses and cycled
> power, but that did not resolve the problem. =A0Suggestions?
>
> Best,
> Christopher

Judging by the trouble you have a Vista-10P, 15P or 20P, the receiver
must be addressed to 00

Follow-Ups:
- Re: Replace 6160RF with 5883H error code 100
  - From: Christopher Glaeser

References:
- Replace 6160RF with 5883H error code 100
  - From: Christopher Glaeser

Prev by Message: Re: Inovonics outdoor range
Next by Message: Re: Replace 6160RF with 5883H error code 100
Previous by thread: Re: Replace 6160RF with 5883H error code 100
Next by thread: Re: Replace 6160RF with 5883H error code 100
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home