[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: DC only alarm panel



On 07/02/2011 1:49 PM, Techvoid wrote:
> Hola
> what small alarm panel can be used with 12vdc battery power only with a
> solar charger?
> what sized battery and what charger have you used or seen in this type app?
> sunny deep south us.
> will I still get a power out trouble and will this cause any problems?
> read where some guy called jiminex said the fbi xl2 would not cause trbl if
> a jumper was installed.  where does the jumper go?  any other panels that
> would work?
> 3 doors and a motion and of course an audible notification appliance.
> gracias
>
>

You can power your panel with another 12 battery.  Hook it straight up
to the AC input.  That way your solar panel only needs to charge the
first battery.  The system will keep the other charged.  Any panel will
do, but the smaller ones tend to draw less in the way of power.  On some
panels you may wind up with a "brown out" condition if the input voltage
isn't high enough so if your solar charger is having a problem
maintaining at least 13.1 to 13.4 VDC the keypad's could go into AC
trouble mode.  I think you'll have a better chance with the FBI XL-2
product.  It uses a 12VAC transformer rather than the standard 16VAC one.

--
Frank Kurz
www.firetechs.net


alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home