[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Transmitting an all is well packet from sensor to main control unit



On Dec 30, 3:45=A0pm, Jim <alarmi...@xxxxxxx> wrote:
> On Dec 30, 5:47=A0pm, mister accavanno <mraccavanno...@xxxxxxxxx> wrote:
>
>
>
>
>
>
>
>
>
> > Ok, let's say the sensor is communicating with the MCU via a 315mhz,
> > 433mhz, or 868mhz frequency. I understand that the system can be
> > jammed and thusly the MCU will not be able to receive the (all is ok,
> > I am here, everything is fine packet) from the sensor and when that
> > periodic packet is sent and not received by the main control unit, the
> > main unit will send out an alarm or a trouble message to the
> > monitoring station. I would like to know if that is the only
> > transmission that is sent by a sensor that is functioning in an armed
> > mode( armed, meaning alarm has been set and home owner or business
> > owner has gone home for the night). I am assuming that the sensor is
> > idle except for the moments when transmitting these packets, or when a
> > person passes the area which the sensor is protecting, thus
> > transmitting a message to the MCU that the closed loop has been broken
> > by detecting the moving heat of a person walking by it. So the
> > question I am asking is: What does the sensor transmit to the MCU, and
> > how often? Does it just send a burst of 315, 433, or 868mhz rf, or
> > does it actually send an encrypted packet of some sort. What does that
> > packet contain(a certain amount of bits, or rf pulses, or what?). And
> > how often are these sent ( as in minutes, hours). I have certain
> > discussions which I would like to initiate depending upon the
> > responses I get from this post. I think the professionals with the
> > knowledge to answer the above questions would be interested with what
> > I have to say about this. Now, I am new in the alarm installing
> > business, but I have noticed some things recently.
>
> Paul?
>
> Is that you?

No, not Paul. Just a new installer on the newsgroup. Do you have a
valid and understandable response to my post? Who is Paul?


alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home