[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: GEM-P3200 on/off report



On Oct 4, 1:03=C2=A0pm, proguard <spki...@xxxxxxxxxxxx> wrote:
> On 4 =CE=9F=CE=BA=CF=84, 18:40, mleuck <m.le...@xxxxxxxxx> wrote:
>
>
>
> > On Oct 4, 4:56=C2=A0am, proguard <spki...@xxxxxxxxxxxx> wrote:
>
> > > On 4 =C3=8F=C3=AA=C3=B4, 11:04, "Robert L Bass" <Sa...@BassBurglarAla=
rms.com> wrote:
>
> > > > "Jim Rojas" wrote:
>
> > > > > I agree. I would rather do it using Quickloader.
>
> > > > That's because you know better. =C2=A0Leuck doesn't.
>
> > > > --
>
> > > > Regards,
> > > > Robert L Bass
>
> > > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D>
> > > > Bass Home Electronics
> > > > DIY Alarm and Home Automation Storehttp://www.bassburglaralarms.com
> > > > Sales & Service 941-870-2310
> > > > Fax 941-870-3252
> > > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D>
>
> > > Finally i made it but only to send openings from user #1 and not
> > > closing! why? what i am missing? i'm very curious!
> > > At addresses from 0650 to 0857 i programm all with the same account
> > > number.
> > > At 0864 --> blank/3
> > > At 0866 --> blank/1
> > > At 1024 & 1025 left all blank
> > > At 1030 --> blank/1
> > > At 1044 --> blank/1
>
> > > and it reports only openings... (as 1401001) (point id)
>
> > > ???
>
> > It should be 1043 for closings users 1 to 8, 1044 is users 9 to 16- =CE=
=91=CF=80=CF=8C=CE=BA=CF=81=CF=85=CF=88=CE=B7 =CE=BA=CE=B5=CE=B9=CE=BC=CE=
=AD=CE=BD=CE=BF=CF=85 =CF=83=CE=B5 =CF=80=CE=B1=CF=81=CE=AC=CE=B8=CE=B5=CF=
=83=CE=B7 -
>
> > - =CE=95=CE=BC=CF=86=CE=AC=CE=BD=CE=B9=CF=83=CE=B7 =CE=BA=CE=B5=CE=B9=
=CE=BC=CE=AD=CE=BD=CE=BF=CF=85 =CF=83=CE=B5 =CF=80=CE=B1=CF=81=CE=AC=CE=B8=
=CE=B5=CF=83=CE=B7 -
>
> :-/ yap...... i feel like an idiot... that was my mistake! If you
> notice the addresses for openings of users 1-32 are form right to the
> left in the programming manual but at closings starts from 1043 right
> to left.
> It's easier to programme via udl software but Gemini isnt a panel i
> use to work with it. I came across with this P3200 while
> i found it preinstalled in a premise and want to take it to my ARC. If
> you have experience in programming with keypad a lot of panels, it
> isnt difficult the Gemini but the addresses are not in order so it is
> a little bit mess. I'm downloading UK panels texecom, Caddx, Omni & XL
> series of FBII, Electronic line, Paradox but in Napco i dont have
> experience in downloading because if i use Napco, i work with
> XP400-600 for small businesses and programming is so easy and fast
> with the keypad.
> Thanks mleuck for your attention and assistance ;-)

Glad to help and I almost missed that one. The XP500/600 and GEM
400/800/801 are much easier to program because they emulate .....drum
roll....DSC programming!


alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home