Re: GEM-P3200 on/off report

[mleuck <m.leuck@xxxxxxxxx>]

On Oct 4, 4:56=A0am, proguard <spki...@xxxxxxxxxxxx> wrote:
> On 4 =CF=EA=F4, 11:04, "Robert L Bass" <Sa...@xxxxxxxxxxxxxxxxxxxxx> wrot=
e:
>
>
>
> > "Jim Rojas" wrote:
>
> > > I agree. I would rather do it using Quickloader.
>
> > That's because you know better. =A0Leuck doesn't.
>
> > --
>
> > Regards,
> > Robert L Bass
>
> > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D>
> > Bass Home Electronics
> > DIY Alarm and Home Automation Storehttp://www.bassburglaralarms.com
> > Sales & Service 941-870-2310
> > Fax 941-870-3252
> > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D>
>
> Finally i made it but only to send openings from user #1 and not
> closing! why? what i am missing? i'm very curious!
> At addresses from 0650 to 0857 i programm all with the same account
> number.
> At 0864 --> blank/3
> At 0866 --> blank/1
> At 1024 & 1025 left all blank
> At 1030 --> blank/1
> At 1044 --> blank/1
>
> and it reports only openings... (as 1401001) (point id)
>
> ???

It should be 1043 for closings users 1 to 8, 1044 is users 9 to 16