[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: ADEMCO 4110 Panic alarm

Subject: Re: ADEMCO 4110 Panic alarm
From: G. Morgan <usenet_abuse@xxxxxxxxx>
Date: Fri, 8 May 2009 13:32:59 +0000 (UTC)
Newsgroups: alt.security.alarms
References: <1e157$4a042cb5$d88adca4$5775@xxxxxxxxx>

bGhasseml wrote:

>We are not very familiar with alarm systems.
>I am resetting an alarmsystem (Ademco 4110)  after fixing all circuits.
>systems resets and ready. But as soon as we arm it (after 15 secon) alarm
>goes off with code 9  +  BAT
>
>But battery reads good charg 13.5 VDC.

Are you reading the batt. voltage while it's plugged in to the panel?  That
won't work.  If the batt. is over 2 years old it may need replacing.

You have to read the voltage disconnected from the panel and under a load.
Otherwise your results are really meaningless.

References:
- ADEMCO 4110 Panic alarm
  - From: bGhasseml

Prev by Message: Re: The auto contact
Next by Message: Re: How to I Setup Security System to Observe backyard?
Previous by thread: Re: ADEMCO 4110 Panic alarm
Next by thread: Re: ADEMCO 4110 Panic alarm
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home