Wireless Trouble 7 "Burn in" on DSC 1555 panel

[tourman <robercampbell@xxxxxxxxx>]

Something I found out recently might help out if you experience a
problem eliminating a trouble 7 (wireless problem). It seems, if you
have a wireless receiver and at least one wireless point of entry
(door or motion) on a DSS 1555 panel, after some time, you may
experience a trouble 7, which doesn't respond to changing the battery
in the wireless device, defaulting and reprogramming the wireless
receiver, or even changing out the wireless component itself. Bottom
line, there seems to be some sort of glitch in the firmware somewhere,
whereby the panel keeps cycling, looking for a wireless keyfob (even
if none is present on the system). If none is actually programmed in
the system, after a long length of time, this trouble may permanently
"burn in" to the panel itself, and cannot be cleared without changing
out the panel for a new one.

It seems the solution is to program in some number other than 000000
in section 41 of the programming in section 804 of the wireless
receiver.

I have no idea why this happens, but this is the second occurrence of
this problem that I have experienced.

Hope this helps someone else