[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Elk M1 and X10 (TW523)

Subject: Re: Elk M1 and X10 (TW523)
From: "Robert L Bass" <Sales@xxxxxxxxxxxxxxxxxxxxx>
Date: Fri, 6 Feb 2009 11:31:42 -0500
Newsgroups: alt.security.alarms
References: <fadfdd4a-0654-4c0f-8e19-88155b2b8036@xxxxxxxxxxxxxxxxxxxxxxxxxxx> <xXFil.20305$%n5.5076@xxxxxxxxxxxx> <490266e6-fc2b-4588-9487-17cea5bebb9a@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

"Jim" <alarminex@xxxxxxx> wrote:
>
> Careful Jim. I don't know what a TW523 is, but if it has to
> do with programing .....  I'm told that if you use the wrong
> cord with the napco dongle, it can cause some damage.

You're right about the Napco PCI-MINI dongle.  Use the wrong cord and you can
ruin the PCI or the board.  The M1 connection to X10 is much simpler.  The
preferred interface is the PSC05.  You should use a standard, 4-conductor
telephone cable.

--

Regards,
Robert L Bass

==============================>
Bass Home Electronics
DIY Alarm and Home Automation Store
http://www.bassburglaralarms.com
Sales & Tech Support 941-925-8650
Customer Service 941-870-2310
Fax 941-870-3252
==============================>

Follow-Ups:
- Re: Elk M1 and X10 (TW523)
  - From: Frank Olson

References:
- Elk M1 and X10 (TW523)
  - From: Jamesarm97
- Re: Elk M1 and X10 (TW523)
  - From: Jim Rojas
- Re: Elk M1 and X10 (TW523)
  - From: Jim

Prev by Message: Re: Ademco Vista10-SE installing new 5808 problems?
Next by Message: Re: Brinks
Previous by thread: Re: Elk M1 and X10 (TW523)
Next by thread: Re: Elk M1 and X10 (TW523)
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home