Re: Help needed MAGELLAN MG5050

[Frank Olson <use-the-email-links@xxxxxxxxxxxxxxxxxxxxxx>]

alarm_1st_timer wrote:
> Hi Guys;
>
> I've completed my paradox alarm installation (according to manual - I
> think?) but somehow something is still missing. The keypad keeps on
> showing message "Zone## open". I have disconnected my expander (SP-
> ZX8) as well as voice dialer (VDMP3) - but still the same problem. I
> then disconnected all zones and used an EOL between Zone1 and C (on
> control panel) but the keypad keeps on showing message "Zone01 open".
> My multimeter indicated that the zone is closed - WHAT AM I DOING
> WRONG? I'm almost sure it's a program setting that must be entered...
>
> I'm using the K32LCD keypad.
>
> Is there anyone out there that can help me?
>
> Thanx


Unfortunately, it's rather difficult to take you through programming
"step by step" in a medium such as USENET.  If you're having problems
understanding programming via the manual, I would suggest that you might
be less frustrated by calling in a pro to do it for you.