[no subject]

"Frank Olson" <use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:C64Bj.65681$w94.49040@xxxxxxxxxxxx
> Gadgets wrote:
> >  I have a Pro3000 that was installed by ADT. I would like to monitor
> > this myself through my home automation system. My problem is, figuring
> > out how to program the system to give me a relay (dry-contact) output
> > that toggles folllowing the arm / disarm status of the system.
> >  Does anyone here know if this can be done?? I know how to program the
> > 3000, I just can't see how to do this part.
> >
> >  Any help is appreciated.
> >
> > Thanks
>
>
> If you know how to "program the 3000", then you must also have the
> "programming manual".  So why are you asking this when the answer is
> right in front of your face?  It's obvious to me that you *don't* know
> how to "program the 3000".  This is an Ademco Vista 20P.  What kind of
> keypad do you have (model number).  Without the proper keypad, you're
> going to find it extremely difficult (if not outright impossible) to
> program the panel.