Re: DLS Software taking forever?

["Mark Leuck" <m..leuck@xxxxxxxxx>]

"Michael" <sirflannelS@xxxxxxxxxxxx> wrote in message
news:krtpp3tr40bj0hudqev4on5ul93jiu91rj@xxxxxxxxxx
> On Sun, 27 Jan 2008 00:19:11 GMT, Frank Olson
> <use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx> wrote:
>
> >Michael wrote:
> >> When I set up the modem, it doesn't allow me to change the speed. I'm
> >> using the defauly 56k setting, probably why.
> >>
> >> On Sat, 26 Jan 2008 08:54:12 GMT, "George Siegle"
> >> <gsiegle@xxxxxxxxxxxxx> wrote:
> >>
> >>> Make sure your modem is set to auto detect for the baud rate, and not
at
> >>> 300.
> >>>
> >>>
> >>> "Michael" <sirflannelS@xxxxxxxxxxxx> wrote in message
> >>> news:lmc4p3ddqemt4b5jvb8932ivsf6aijkvai@xxxxxxxxxx
> >>>> Using DLS 2002 to upload a 4020 v3.5 panel. Panel was programmed on
> >>>> sight, and just uploading a copy. It's been uploading for an hour,
and
> >>>> it's about 80% or so done. Is that normal?
> >>
> >
> >
> >AFAIK, the DSC modem doesn't do "56K"...  What modem are you using??
>
> No, but under the Modem Configuration, I am using the "default 56k
> modem" option, because there was nothing that matched the actual modem
> (Hayes 2400 Smartmodem)

A Smartmodem 2400 won't work, a Smartmodem Optima 2400 will

The 56k setting doesn't work