[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: eol dsc1550



Crash Gordon wrote:
> you should read the output of the charging circuit without the battery, not
> sure what it should be on a DSC you'd have to call tech support if they
> still have tech support any more.
>
>

I did put the meter to the wires, with
the battery  unplugged.  I read in this
newsgroup earlier that these readings
should be around 13.7, they were that.

Then I was able to check these wires
also with a battery plug in.
The reading fell on the wires, with the
  bad battery to the reading of the
battery, which was  11.9, and the
reading would continue to drop.

I did the same procedure with a new
battery, the reading was 13.6 and
rising. then when it got to 13.7 the
trouble light went out on the keypad.

Thanks for all the help. I believe all
the problems are fixed.
Thanks, Joe


alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home