Re: phone line and communication alarm on dsc 832 system

["Just Looking" <nospam@xxxxxxxxxx>]

How to Enter Installer Programming
Installer Programming is used to program all communicator and panel options.
LED Keypad / Fixed Message LCD Keypad
Step 1 From any keypad enter [*][8][Installer Code].
. The 'Program' light will flash to indicate you are in programming
. The 'Armed' light will turn on to indicate the panel is waiting for the 3
digit Section number to program
Step 2 Enter the 3 digit Section number you want to program.
. The Armed light will turn off
. The Ready light will turn on to indicate the panel is ready for the
information for the selected Section
If the 3 digit section number entered is not valid or the module that
pertains to the Section is not
present the keypad will sound a 2 second beep or error tone.
LCD Keypad
Step 1 From any keypad enter [*][8][Installer Code].
The Keypad will display 'Enter Section' followed by three dashes.
Step 2 Enter the 3 digit Section number you want to program.
The keypad will now display information for the section entered.

If the Communicator Disable option is selected the panel will not attempt to
call central station.
Communicator Disable ........................................... Section
[380], Option 1
When the TLM Enable option is selected, the panel will supervise the phone
line and will indicate a trouble condition if the phone line is
disconnected.
TLM Enable/Disable ............................ Section [015], Option [7]



<gonzo2780@xxxxxxxxx> wrote in message
news:1189203953.574350.283680@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> I recently powered up the alarm system that was in the house I
> bought, and I keep getting a trouble alarm on the panel that shows
> comunication and phone line troubles.  I am not going to have the
> alarm sys monitored right now. I have unplugged the phone line up to
> the circuit board, but does not help either,any help on how to take
> these trouble alarms off thanks
>