Re: cctv camera no image

[resistors4@xxxxxxxxx]

On Oct 29, 2:21 pm, e.dav...@xxxxxxxxxxxx wrote:
> What could be the cause of a cctv camera suddenly having no image?
> There is still a power LED coming on, but no signal coming through.  I
> have tested the voltage on the BNC output and it shows 0V.

Well you should not have any voltage on the BNC connector. You should
have 2 conductors for power. But if the led is on then you have power.
So either the BNC end went bad especially if it is those junk twist on
ones or something blew the camera. I have had that happen twice in the
last couple weeks