Re: Ademco 6139 with 5827BD Keypad

["Mark Leuck" <m..leuck@xxxxxxxxx>]

The ADT version is, if I recall its the 6139B. Kinda big and ugly

"Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:47019368$0$3567$815e3792@xxxxxxxxxxxxxxxxx
> 6139 is not longer vertically than horizontal
>
> --
> Crash Gordon
> -------ouch------
>
> <I feel like I'm diagonally parked in a parallel universe>
> "Marc" <mlipovitch@xxxxxxx> wrote in message
> news:TjaMi.142692$Mu5.124857@xxxxxxxxxxxxxxx
> | Anyone gotten one of these to work?  I realize the 6139 (older version
> | I think-longer vertical than horizontal), have the panel set to address
> | 16 where there is a visible display (28,29,30 = no display).  Tried
> | cutting jumpers on the 5800TM transmitter to changes the addresses
> | mentioned above, and making the panel non-addressable by setting to 31
> | (=no display condition).  It is an ADT branded panel used witha Vista
> | 20P board, and seems to wrok just fine otherwise.  Also using the 5882
> | remote RF receiver (I think it's the Canadian version, but works with
> | all transmitters I tried it with, door/window, smoke alarm, glassbreak,
> | etc.....also works fine with 5827BD except for indication of armed
> | status if I change the panel to a 6150 non-alpha keypad).
> |
> | This one is driving me crazy, maybe thinking of going to a more
> | advanced keypad anyways.  Picked up the 6139 cheap at a GoodWill thrift
> | store for a buck, and it does allow me to program the system....Any
> | help/advice appreciated!
> |
> | Marc
>
>