Re: Antique Motion

[geewhiz304@xxxxxxxxx]

On Oct 22, 9:50 pm, Nomen Nescio <nob...@xxxxxxxxx> wrote:
> >I got called to replace 3  Aritech PIR on a Radx 8112. Both as old
> >as my Grandfather. I need somebody to clue me in on the wiring for
> >this. it has a terminal strip 1.Black 2. Red 3. Red 4. Green  6. White
> >and Red wire both in postion 6. 5,7,8 have no wires going to them.
>
> I don't mean to be unkind, but don't you have a meter?  It should take you
> less time to meter it out than to type in your question.
>
> For what it's worth, the standard wiring for Aritech detectors is:  1=
> negative, 2=positive, 3=NC, 4=C, 5=NO .  I hope you understand what an 8112
> zone is supposed to look like.

Allow me to tell a story. Yes I have a Meter. I certainly am not use
to working on a 8112. So the story is I work with a Nut case. He
called me to get the info off of the Motion. I suggested checking it
out. He refused said NO!! Get the model number and order new ones!! No
he is not my boss. the part that got/get me is the white wire with the
red wire under the same terminal. I guess it must be a tamper? Thanks
for the replies guys.