Re: old honeywell fire system

["Roland Moore" <roland@xxxxxxxxxxxx>]

>and everything was lost

No back ups with the city?

"goofy" <goofyman_2000@xxxxxxxxx> wrote in message
news:1175945583.091578.12000@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> On Apr 7, 2:43 am, "Roland Moore" <rol...@xxxxxxxxxxxx> wrote:
>> >and the problem also is that i have no schematics.
>>
>> How is that possible? There were no plans and submittals made when it was
>> installed?
>>
>> "goofy" <goofyman_2...@xxxxxxxxx> wrote in message
>>
>> news:1175895703.063965.105180@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>
>>
>>
>> > On Apr 6, 7:49 am, "Nick Markowitz Jr." <nick-markow...@xxxxxxxxxxx>
>> > wrote:
>> >> If that panel is an old honey well addressable delta net
>> >> they were prevelent to having that problem most companys have pulled
>> >> the
>> >> panel out and replaced it with a fire-lite ms9200 which is compatable
>> >> to
>> >> the
>> >> addresable modules."goofy" <goofyman_2...@xxxxxxxxx> wrote in message
>>
>> >>news:1175852962.210077.216120@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>
>> >> > On Apr 5, 5:21 pm, Jim Rojas <jro...@xxxxxxxxxxxx> wrote:
>> >> >> How is the AC loss reported? Does this panel have a built in
>> >> >> dialer?
>> >> >> Or
>> >> >> is it just an annunciator showing AC loss?
>>
>> >> >> Jim Rojas
>>
>> >> >> goofy wrote:
>> >> >> > i am working on an old honeywell fire system in a 20 story
>> >> >> > building.
>> >> >> > i
>> >> >> > keep getting an a/c power loss error but i am not losing a/c
>> >> >> > power.
>> >> >> > i
>> >> >> > put a fluke recorder on both the 120v input and 29vdc output and
>> >> >> > havent seen more than a .3v change in either. ive tryed new power
>> >> >> > supplies, boards, and input power source. any ideas what might be
>> >> >> > causing this?- Hide quoted text -
>>
>> >> >> - Show quoted text -
>>
>> >> > it has a built in dialer that goes to a central router- Hide quoted
>> >> > text -
>>
>> >> - Show quoted text -
>>
>> > i dont think the problem is with the panel. there are 3 other building
>> > with the same system with no problems. also, the problems are only
>> > with 2 power supplies that control the first 2 dgp panels. there are 6
>> > other dgp panels with no problems and they all tie into the same
>> > communication. its says that there is an ac power loss roughly every
>> > 20 min. and it only lasts 1 min. almost like the power supply is going
>> > into thermal overload and resetting but it isn't. the points have been
>> > taken out just so we dont get the alarm notification every 20 min. ive
>> > only been working on this system for 2 months and the problem also is
>> > that i have no schematics. but like i said, every other building is
>> > ok. thanks for any input.- Hide quoted text -
>>
>> - Show quoted text -
>
> the system was installed about 20-30 years ago. all the schematics and
> plans were in the basement and there was a water main break and
> everything was lost
>