[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Can an alarm with PGM outputs, and/or other outputs, be wired to an X10 sensor?

Subject: Can an alarm with PGM outputs, and/or other outputs, be wired to an X10 sensor?
From: anonymous <nospam@xxxxxxxxxx>
Date: Tue, 27 Feb 2007 14:42:03 -0600
Newsgroups: alt.security.alarms, alt.security.doityourself

Hello, and thanks for reading. Can an alarm controller that has "2 PGM
outputs [2.5A] and 1 alarm relay [5A]" and "1 supervised bell output and
1 supervised auxiliary output" be attached to a wireless X10 door/window
sensor ( ftp://ftp.x10.com/pub/manuals/ds10a-is.pdf ), so that when the
alarm system goes off for any reason, an X10 signal is sent? Any advice
on this? Thanks.

Follow-Ups:
- Re: Can an alarm with PGM outputs, and/or other outputs, be wired to an X10 sensor?
  - From: E. Hill
- Re: Can an alarm with PGM outputs, and/or other outputs, be wired to an X10 sensor?
  - From: Jim

Prev by Message: Re: What's New?
Next by Message: Re: What's New?
Previous by thread: MI5 Persecution: Troubling Censorship Issues 20/8/95 (3507)
Next by thread: Re: Can an alarm with PGM outputs, and/or other outputs, be wired to an X10 sensor?
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home