Re: Something went Bad Wrong!

["RockyTSquirrel" <gafa_usa@/nospam/hotmail.com>]

not the loop,  only in reference to a good earth ground  :o)

((check how solid the ground is  by  inserting a diode in series with the
leg being checked  and ampmeter it to ground. NOTE  start with the hightest
range  on the meter and work down to the lowest..  Really hi current tells
me  its a really bad ground at the pump,  low current  says panel ground
slightly better than pump..))

RTS

Happy Holidays


"Robert L Bass" <RobertLBass@xxxxxxxxxxx> wrote in message
news:M549j.47416$rZ3.42946@xxxxxxxxxxx
> "RockyTSquirrel" wrote:
> >
> > could of had a floating ground at the pump. ground would have then
> > gone to the panel. resulting in a larger voltage from the supply..
> >
> > rural  america  is full of old wiring with a weak or missing device
> > ground.
>
> That's a possibility but if that were the case I'd expect there to be
> voltage on the shorted low voltage line at all times.  Any thoughts?
>
> --
>
> Regards,
> Robert L Bass
>
> ==============================>
> Bass Home Electronics
> 4883 Fallcrest Circle
> Sarasota · Florida · 34233
> http://www.bassburglaralarms.com
> Sales & Tech Support 941-925-8650
> Customer Service 941-232-0791
> Fax 941-870-3252
> ==============================>
>