[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: NX-8 ground fault troubles



I never had problems with DSC's Maxsys 4020 system. I have used those a lot
with fire installations and used addressable smokes and pulls. The only
downfall, you have to buy the bell output box which gives you 2 24VDC bell
outputs but it's a separate enclosure. You can have up to 4 of them with a
total of 8 bell outputs.



Another thing I like is it's a combo system. Burg, Fire, and Access. I like
it but if I needed it for something over 128 addressable zones, I would have
to use something else. Other than that, I use a lot of DSC systems. I also
go through Security Equipment Supply to get my stuff...   www.sesonline.com





M















"Roland Moore" <nospam@xxxxxxxxxx> wrote in message
news:4762a485$0$5012$4c368faf@xxxxxxxxxxxxxxxxx
> The Napco MA 3000? I wouldn't write home about it. It is the same thing
> since the early 90's and is going away soon.
> Honeywell has it own set of problems; different that the NX-8 but equally
> irritating. The 128ma limit on the SIM loop is one big one. Ground faults
> that appear when the phone line is connected when programming is another
> known issue.
>
> If you need a small inexpensive fire panel using a combo burg fire panel
> might not be the best option. I have used about a 50 or so Bosch 7024 fire
> panels.
>
> "Robert L Bass" <RobertLBass@xxxxxxxxxxx> wrote in message
> news:s5n8j.26720$0O1.23286@xxxxxxxxxxx
>> "clay_ali" wrote:
>> >
>> > I have been having problems with some of my NX-8 CF panels with
>> > fire supervision modules.  Per Tech Support I have re-wired the
>> > ground and pipe connections in a number of different ways with the
>> > same result. The panel goes into and restores ground fault troubles
>> > sometimes every minute. One of the tech support guys told me they
>> > were having this problem with many of their panels and have yet to
>> > find a sure fire solution.  All suggestions will be appreciated.
>>
>> Switch to Napco or Honeywell.
>>
>> --
>>
>> Regards,
>> Robert L Bass
>>
>> ==============================>
>> Bass Home Electronics
>> 4883 Fallcrest Circle
>> Sarasota · Florida · 34233
>> http://www.bassburglaralarms.com
>> Sales & Tech Support 941-925-8650
>> Customer Service 941-232-0791
>> Fax 941-870-3252
>> ==============================>
>>
>
>




alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home