[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: How to locate 22/4 jacketed buried in wall.
ABLE_1 wrote:
> chasbo,
>
> Step One -- Shoot the drywaller in the foot so he won't think about doing it
> again.
Good plan.
> Step Two -- Get a Toner/Probe as suggested by "alarman".
>
> Step Three -- Find it.
>
> Step Four -- If it can't be located because it is too deep then take any
> siren driver connect to other end of wire add battery and use above probe to
> locate. It will be very very loud and much easier to find.
When you connect the signal generator, hook one lead to the wire, and
the other to an earth ground.
It will be plenty loud then.
Alternate idea: tie the drywaller up and force him to watch while you
rip the walls apart to find the wire... then lock him in the house until
he repairs the wall.
alt.security.alarms Main Index |
alt.security.alarms Thread Index |
alt.security.alarms Home |
Archives Home