Re: FBII OMNI 400/600 question

["Proguard Security" <proguard@xxxxxxxxxxxxxxx>]

I didn't run it at all! From the first second that i attach the battery
leads the voltage drops down to 2.7


Ï "Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> Ýãñáøå óôï ìÞíõìá
news:462c3587$0$490$815e3792@xxxxxxxxxxxxxxxxx
>
> disconnect the battery, attach the AC, then reconnect the battery.
>
> 2.7 v  won't run the panel, sounds like you ran the batt down...give it a
> few hours to recharge. how long have you been running it on batt only?
>
>
>
> <proguard@xxxxxxxxxxxx> wrote in message
> news:1177301128.900770.141620@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> | Recently i install an FBII Omni 400. I try to boot the panel without
> | ac, only with the battery, but nothing happens...
> | Is that correct?! It only wakes up with ac? We dont have untill now ac
> | power cause its a new building.
> | I measure 12.8 V on battery and when i connect the battery leads i
> | read on the panel terminals 2.7 V... Without any power connection even
> | for the pirs or the keypad...
> |
>
>