[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: dsc wireless ?
Your right. the newer versions have to have a serial number programmed
before they will show up. what a bummer.
"Doug" <not@xxxxxxxx> wrote in message
news:B_fWh.205061$JN6.81435@xxxxxxxxxxxxxxx
>I didn't think the RF keypads would show up on the system, either through
>902/903 from the keypad or auto detect in the software until at least one
>transmitter was enrolled on the system, and not that I want to be anal,
>yeah I know, I have no choice, but the keypad has a built in receiver, not
>transmitter
>
>
> Doug
>
> --
>
> "Tommy" <tommy at leesecurity.net> wrote in message
> news:132j2fn1ffdc801@xxxxxxxxxxxxxxxxxxxxx
>> Once you find it in the software with the auto detect you can do all the
>> programming in DLS.
>>
>>
>> "Nick Markowitz Jr." <nick-markowitz@xxxxxxxxxxx> wrote in message
>> news:H6eWh.1034$Wa.207@xxxxxxxxxxx
>>> No here not enforcing cp01 here yet
>>>
>>> i see the module thru keypad will have to look for the drop down menu.
>>> thank you.
>>>
>>> "Roland" <roland@xxxxxxxxxxxx> wrote in message
>>> news:46296c96$0$17155$4c368faf@xxxxxxxxxxxxxxxxx
>>>> You need to do a 902 & 903 to see if the module enrolls. Then in the
>>>> software do a sniff for enrolled modules (tools drop down - Auto -
>>>> Detect Modules). I think it will show up as RFK5132 in the DLS software
>>>> if it enrolled on the panel. Using an 864? It's illegal in these parts.
>>>> How about in yours?
>>>>
>>>> "Nick Markowitz Jr." <nick-markowitz@xxxxxxxxxxx> wrote in message
>>>> news:uwdWh.456$Fc1.73@xxxxxxxxxxx
>>>>> using a power 8-64 with the keypad with wireless transmitter built in
>>>>> under modules i do not see a ,listing for it. should i use the
>>>>> wireless acessory default to program this keypad with software or do
>>>>> i do everything wireless wise thru keypad only
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
alt.security.alarms Main Index |
alt.security.alarms Thread Index |
alt.security.alarms Home |
Archives Home